Conclution Essay Example | Topics and Well Written Essays - 250 words

Conclution - Essay ExampleA fewcalculations were requiredfor making this piece in SolidWorks. The scrap stage used SURFCAM to define the stock size, shaping tools, feeds and speeds.The SURFCAMsoftware also definedeach tool path. The third stage bear on generating the G-code for machine the piece. During the fourth stage, the G-code was transferred to the HAAS machine using the GibbsCAM software in the machine shop. The final stage include loading the tools, selecting the zero points for each tool with the stock and running the machine to build the block.To start, a rising file was open with a sketch on the front plane. Drawing from the origin, a center rectangle was pull with dimensions of six in. on the x-axis and four in. on the y-axis. Fully defined, a fillet was then made with the roentgen of 0.250 in. on all niches. Following that, the rectangle was extrudedwith a one in. depth. After the extrusion, the upper portion of holes to be drill was worked on next.The first hole, which was drawn for a linear exemplar, was placed at the top left corner with a 0.250 in. diameter and an extruded cut depth of 0.250 in.The distance on the x-axis from the left edge to the center of the circularize right, had a dimension of 0.500 in. indention. From the topof the rectangle to the center of the circle down, a dimension of 0.500 in. was also added. From here, a linear pattern was used to generate six holes by patterning with the x-axis with a distance of 0.43 in. from the center of one circle to the next. The tempo that proceeded with the drilling of the upper portion of the holes came to an extruded cut of a filleted rectangle with dimensions of 1.25 in. on the y-axis and 2.250 in. on the x-axis with an extruded cut of 0.250 in.This rectangle was to be positioned at the bottom left corner of the part with a dimension from the bottom edge of the part up to the bottom of the rectangle of 0.38 in.This same dimension was to be added to the left edge of the part towa rds the right